History in Structure

This site is entirely user-supported. See how you can help.

Gates and Railings to S Entrance to Springfield

A Grade II Listed Building in Worcester, Worcestershire

We don't have any photos of this building yet. Why don't you be the first to send us one?

Upload Photo »

Approximate Location Map
Large Map »


Latitude: 52.1988 / 52°11'55"N

Longitude: -2.2261 / 2°13'34"W

OS Eastings: 384639

OS Northings: 255646

OS Grid: SO846556

Mapcode National: GBR 1G4.20N

Mapcode Global: VH92M.CZHR

Plus Code: 9C4V5QXF+GG

Entry Name: Gates and Railings to S Entrance to Springfield

Listing Date: 27 June 2001

Grade: II

Source: Historic England

Source ID: 1063861

English Heritage Legacy ID: 488592

ID on this website: 101063861

Location: Britannia Square, Worcester, Worcestershire, WR1

County: Worcestershire

District: Worcester

Electoral Ward/Division: Cathedral

Parish: Non Civil Parish

Built-Up Area: Worcester

Traditional County: Worcestershire

Lieutenancy Area (Ceremonial County): Worcestershire

Church of England Parish: Worcester St George with St Mary Magdalene

Church of England Diocese: Worcester

Tagged with: Gate Guard rail

Find accommodation in



620-1/8/694 Gates and railings to S.
entrance to Springfield


Southern entrance to Springfield comprising pair of drive gates,
pedestrian gate and associated hinge-posts, flanking railings
together with end-posts, plinth and pillars. Gates and hinge
posts are considered neither to match nor to be original to this
entrance but all probably early C19 with the railings and
stonework being contemporary with the house. Wrought-iron,
cast-iron, timber, and sandstone. Overall length of gateway
approx. 18m. between square stone pillars approx. 2m. high with
pyramidal tops and incised with simplified form of Greek Key
decoration. Line of gates and railings set back from pillars and
site boundary by approx. 3m. End-sections of railings and plinth
curved in plan to link to pillars. Paired gate opening approx.
5m. wide with pedestrian gate to right. Gates set asymmetrically
off-centre right. Height of gates and railings approx. 1.75m.;
railings set on 0.3m. high stone plinth. Intermediate posts to
railings are square-section with anthemion terminations,
otherwise circular, alternate full height and third height, the
former with smaller cast anthemium finials, the latter with
fluted arrowheads. Terminations to railings at gate ends are
cast-iron skeleton posts incorporating anthemion cap, Greek Key
motif, diagonal cross-bracing and dog bars to match railings.
Scrolled stays to rear of intermediate posts. Hinge-posts are
cylindrical cast-iron decorated with raised strapwork and
mouldings to part-spherical caps and further decorative finials;
identified in casting as being by Bayliss Ltd. of London. One of
the posts is a timber replica. The gates are square-section,
full-height bars with pointed tops Decoration limited to bobbins
to centre of each gate together with C scrolls to ends and
HISTORICAL NOTE: the First Edition O.S. Map of 1886 shows the
present entrance layout but without the side pedestrian access
and gates apparently symmetrically positioned.

External Links

External links are from the relevant listing authority and, where applicable, Wikidata. Wikidata IDs may be related buildings as well as this specific building. If you want to add or update a link, you will need to do so by editing the Wikidata entry.

Recommended Books

Other nearby listed buildings

BritishListedBuildings.co.uk is an independent online resource and is not associated with any government department. All government data published here is used under licence. Please do not contact BritishListedBuildings.co.uk for any queries related to any individual listed building, planning permission related to listed buildings or the listing process itself.

British Listed Buildings is a Good Stuff website.