History in Structure

This site is entirely user-supported. See how you can help.

Darley Mill with Attached Chimney

A Grade II Listed Building in Darley and Menwith, North Yorkshire

More Photos »
Approximate Location Map
Large Map »


Latitude: 54.0332 / 54°1'59"N

Longitude: -1.706 / 1°42'21"W

OS Eastings: 419356

OS Northings: 459727

OS Grid: SE193597

Mapcode National: GBR JPJS.GZ

Mapcode Global: WHC84.RWTG

Plus Code: 9C6W27MV+7J

Entry Name: Darley Mill with Attached Chimney

Listing Date: 3 March 1987

Grade: II

Source: Historic England

Source ID: 1251391

English Heritage Legacy ID: 434079

Location: Darley and Menwith, Harrogate, North Yorkshire, HG3

County: North Yorkshire

Civil Parish: Darley and Menwith

Traditional County: Yorkshire

Lieutenancy Area (Ceremonial County): North Yorkshire

Find accommodation in

Listing Text

SE 15 NE (west side)

13/116 Darley Mill with attached


Range of corn mill buildings composed of: engine house, mill range and barn
and byres. Late C18 - mid C19. Coursed squared gritstone, graduated stone
slate roofs. Plan: engine house of 2 storeys and 4 bays; mill building of 3
storeys and 6 bays with projecting 2-storey porch and loading wing bay 6;
barn and byres of 5 bays. Engine house: half-glazed double doors with tie-
stone jambs flanked by 4-pane casement windows; glazed cart entrance right,
with segmental keyed arch and keyed round-arched window far right. Windows
to first floor: left and centre: three 6-pane casements; far right - round
arched window as ground floor. Stone gutter brackets; chimney stack rises
from eaves, centre. Mill building: loading doors with tie-stone jambs bay
3, ground and first floors. 20-pane side-sliding sashes throughout. Stone
gutter brackets. Shaped kneeler and gable coping to left. Loading wing:
left return has 2 round arches with herringbone tooling to voussoirs, 9-pane
window first floor left; shaped kneelers and gable coping; right return has
single segmental archway on right. Barn and byre range: central segmental-
arched cart entrance, end byre entrances with tie-stone jambs, that to left
flanked by paired recesses and with loading opening above. Rear: on right
the mill chimney stands approximately 1.5 metres in front of engine house;
it has a square base and moulded foot to circular shaft of which the lower
10 metres (approximately) survives. Mill building: large waterwheel,
restored 1984, stands against centre. The stonework is of large blocks laid
almost to an ashlar finish, and there is evidence of a roof over the wheel.
Fenestration as front. Interior: mill building - cast-iron columns support
iron cross beams; original timber work to floors. Mill machinery: overshot
water-wheel attached to rear wall, centre; gearings, belts and drive wheel
remain on ground and first floors; roof structure - 5 double queen strut
trusses to main range; 3 unusual king post trusses to loading wing the base
of the king post bolted between angled cross beams of scissor-brace type.
Barn and byre range has 4 double queen post trusses with notches for angled
braces and iron tie-bands. At the edge of the mill-pond several millstones
have been used in the revetment to the bank. An iron rim has the lettering
'George Maris Maker Leeds 1841'.

Listing NGR: SE1935659727

This text is from the original listing, and may not necessarily reflect the current setting of the building.

Recommended Books

Other nearby listed buildings

BritishListedBuildings.co.uk is an independent online resource and is not associated with any government department. All government data published here is used under licence. Please do not contact BritishListedBuildings.co.uk for any queries related to any individual listed building, planning permission related to listed buildings or the listing process itself.

British Listed Buildings is a Good Stuff website.